MOTUL 5100 10W30 4T 4L
Lifetime warranty on zippers, velcros, hook buttons and seams.
Free shipping worldwide (check conditions).
Our experts will help you choose the best product for you. Ask us!
Motul 5100 4T 4L 10W30 oil
Motorcycle cruisers, trails, motorcycle off-road, enduro, trial... equipment engines 4 times with integrated speed or not & bathed in oil or dry clutch boxes, engines designed to use lubricants with low viscosity, that responds to the anti-contaminantes standards Euro 2 to Euro 3, equipped with pos exhaust gas treatment systems: catalysts, air injection into the exhaust... Particularly recommended for HONDA, YAMAHA motors that recommended oil SAE 10W-30 grade in some of their models. Other applications: motorcycle without post catalysts, scooters, quads, mopeds...
- STANDARDS API SM / SL / SJ / SH / SG
- JASO MA2 SPECIFICATIONS n ° M033MOT111
- Lubricant Technosynthese® reinforced base Ester to ensure the anti-wear properties and ensure the longevity of the gearbox gears.
- Improvement of the lubricant film resistance to high temperatures for greater protection of the engine.
- Contained phosphorus and sulphur optimized (JASO MA2 < 1200 ppm) to ensure the performance and the durability of the catalyst in the exhaust system.
- Excellent protection of speed thanks to an innovative additives anti-wear technology: Results of the Test FZG Test FZG = FLS 14: FZG test (Forschungsstelle für Zahnräder und Getriebebau) assesses the capacity of lubrication or protection fluid between two sprockets wear-resistant subject to a variable coupling.
- JASO creates its own rule - JASO T903 - for engines 4T motorcycle that involves three levels: JASO MA, MA1, MA2.
- The specification JASO MA2 offers the highest level of friction to ensure a perfect friction of the clutch in three phases of operation: at the start, acceleration and top speed.
TIPS FOR USE:
- Maintenance intervals: according to the manufacturer recommendations and adapted to their own use.
- It can be mixed with synthetic or mineral oils.
|Viscosity grade||SAE J 300||10W-30|
|Density at 20° C (68° F)||ASTM D1298||0.871|
|Viscosity at 40° C (104° F)||ASTM D445||74.6 mm²/s|
|Viscosity at 100° C (212° F)||ASTM D445||11.5 mm²/s|
|Index viscosity||ASTM D2270||147|
|Freezing point||ASTM D97||-36° C / - 32.8° F.|
|Flash point||ASTM D92||226° C / 438.8 ° F|
|TBN||ASTM D2896||7.5 mg KOH/g|
- PAÍS ORIGEN