







Order it before 6 hours and 56 minutes and receive it between on Tue 4 August and Fri 7 August
Jacket SPIDI Traveler 3 Evo military. The jacket has been designed to comfortably face even the harshest climates; in fact, it is equipped with a 150gr/m² removable lining and a waterproof and breathable H2Out® membrane, but at the same time allows for great ventilation thanks to the wide dynamic air inlets on the chest and back.
The outer shell is made of a high-strength fabric combined (in the areas most exposed to abrasion) with a polyester-based ripstop construction material, which offers an excellent weight/strength ratio.
The Traveler 3 Evo H2Out® utilizes the ErgoFit® system to allow for optimal fit through 8-point tapering. The YKK® perimeter zipper allows the jacket to be attached to any SPIDI-ready pant model. Removable shoulder and elbow protectors are from the Warrior Lite series with CE level 2 certification, while the inner back pocket can accommodate a Warrior series level 1 or 2 back protector. The combination of 600 and 1200 polyester and its abrasion resistance have enabled the jacket to achieve Class AA certification to EN 17092-2:2020.
Waterproof pockets are located on both the mesh lining and the removable lining, while 3M® reflective zones are located around the perimeter of the jacket to ensure 360° passive visibility at night.
MAIN CHARACTERISTICS
Jacket SPIDI Traveler 3 Evo military. The jacket has been designed to comfortably face even the harshest climates; in fact, it is equipped with a 150gr/m² removable lining and a waterproof and breathable H2Out® membrane, but at the same time allows for great ventilation thanks to the wide dynamic air inlets on the chest and back.
The outer shell is made of a high-strength fabric combined (in the areas most exposed to abrasion) with a polyester-based ripstop construction material, which offers an excellent weight/strength ratio.
The Traveler 3 Evo H2Out® utilizes the ErgoFit® system to allow for optimal fit through 8-point tapering. The YKK® perimeter zipper allows the jacket to be attached to any SPIDI-ready pant model. Removable shoulder and elbow protectors are from the Warrior Lite series with CE level 2 certification, while the inner back pocket can accommodate a Warrior series level 1 or 2 back protector. The combination of 600 and 1200 polyester and its abrasion resistance have enabled the jacket to achieve Class AA certification to EN 17092-2:2020.
Waterproof pockets are located on both the mesh lining and the removable lining, while 3M® reflective zones are located around the perimeter of the jacket to ensure 360° passive visibility at night.
MAIN CHARACTERISTICS
ALPINESTARS Stella Andes V3 Drystar ice gray / dark gray / black coral
DAINESE Tonale Lady D-Dry XT glaciar grey
ALPINESTARS Stella Sektor V2 Tech black / coral
DAINESE Tonale Lady D-Dry XT black / ebony / black